•knurl

knurl 发音

英：[nɜːl]　　美：[nɝl]

英：　　美：

knurl 中文意思翻译

knurl 网络释义

n. 隆起；节，瘤；硬节

knurl 词性/词形变化，knurl变形

动词现在分词: knurling |动词过去分词: knurled |形容词: knurled |动词过去式: knurled |动词第三人称单数: knurls |

knurl 短语词组

1、knurl wheel ─── [化] 滚花轮

knurl 相似词语短语

1、knurs ─── n.硬的突起；（木头的）结节

2、knurls ─── n.球形突出物，脊状突出物；滚纹；n.给……压上滚纹

3、knurr ─── n.木球；（树木的）节疤（等于knur）

4、uncurl ─── vi.伸直；展开；vt.使变直；使舒展

5、knur ─── n.硬的突起；（木头的）结节

6、knurled ─── adj.有凸边的；有节的

7、nurl ─── 努尔

8、knurrs ─── n.木球；（树木的）节疤（等于knur）

9、knurly ─── adj.多瘤的；多节的

knurl 常见例句（双语使用场景）

1、There are lots of advantages by cold extrusion for straight knurl nut in a single process. ─── 直纹滚花螺母采用冷挤压一次成形新工艺,成效显著。

2、Insert nut is designed for rapid installing into thermo-plastics by means of ultrasound. Its two opposite helical knurl bands provide a combination of high torque and pulling out resistance. ─── 压入式螺母通过加热或利用超音波可快速安装到热塑性塑料中,它的两道相反旋向的压花带可提供较高的抗扭转和抗拉拔能力.

3、The cap was based on Bericap standard design SK40/24 PV with customized knurl finish and embossment with CA star or Chevron logo on top of the cap. ─── 上限是根据百利盖标准设计SK40/24光伏定制隆起完成和浮雕与CA明星或雪佛龙标志上方帽。

4、The spin resistance of the knurl greatly exceeds the torque that can be exerted by the self-locking feature . ─── 花齿的旋转阻力能极大的超越其自锁性能可以承受的扭力。

5、Both lateral and medial nasal vestibule have a knurl. ─── 鼻孔后方内、外侧均有隆起；

6、knurl roll ─── 压花辊

7、annular knurl ─── 滚花

8、coarse diamond knurl ─── 粗菱形滚花菱形粗滚花

9、knurl wheel ─── 滚花轮

10、Abstract： There are lots of advantages by cold extrusion for straight knurl nut in a single process. ─── 摘 要： 直纹滚花螺母采用冷挤压一次成形新工艺，成效显著。

11、Buy Brass Bushing With Knurl ─── 美国求购黄铜

12、lapping knurl ─── 超精研瘤

13、Figured plate glass calls an annular knurl glass, is to adopt one kind of plate glass that rolling method makes. ─── 螺母采用冷挤压一次成形新工艺，成效显著。

14、Keywords straight knurl nut;cold extrusion;die structure; ─── 直纹滚花螺母;冷挤压;模具结构;

15、Applied to all the steam valves, steamer universal valves, expanded knurl, the easy crystallization pumps and valves with high temperature and low speed. ─── 可适用于所有的蒸汽阀门、汽轮通用阀门、膨胀节，高温滑阀和转速转低的易凝结晶泵、阀门等。

16、cold extrusion for straight knurl nut in a single process. ─── 直纹滚花螺母采用冷挤压一次成形新工艺，成效显著。

17、Use pilot lead-in to guide assembly into hole and press knurl into panel until ferrule shoulder contacts surface.Thread sizes #4 to 1/4"and M3 to M6. ─── 用铆套铆入部分将组件插入孔内,然后压入门板,直至铆套肩部接触到门板表面. 牙纹规格:#4 to 1/4和M3 to M6.