•multiaxial

multiaxial 发音

英：[ˌmʌltɪˈæksɪəl]　　美：[ˌmʌltɪˈæksɪəl]

英：　　美：

multiaxial 中文意思翻译

multiaxial 短语词组

1、multiaxial joints ─── [医] 多轴关节, 杵臼关节

2、multiaxial drawing ─── 多轴绘图

multiaxial 相似词语短语

1、multinomial ─── adj.多项的；n.多项式

2、multiserial ─── adj.多列的；多行的

3、multimedial ─── 多媒体

4、multiracial ─── adj.多民族的

5、multifocal ─── adj.多焦点的；多病灶的

6、multispiral ─── 多螺旋的

7、multifil ─── 复丝

8、multicausal ─── 多因素的

9、multi-racial ─── adj.多民族的

multiaxial 常见例句（双语使用场景）

1、multiaxial proportional loading ─── 多轴比例加载

2、multiaxial stress ─── 多向应力

3、Multiaxial fatigue life prediction methods are concentrated, in which critical-plane strain energy density criteria seem to be the most promising. ─── 主要评述各种多轴疲劳寿命估算方法，其中临界面应变能密度法是较为有效的方法。

4、The authors present a novel technique of atlantoaxial fixation using multiaxial C-1 posterior arch screws. ─── 作者描述了使用多轴c - 1后弓螺钉固定寰枢椎这一较新颖的技术。

5、Low cycle multiaxial fatigue failure is the main failure mode of aeroengine compressor disk. ─── 低循环多轴疲劳失效是航空发动机低压压气机轮盘的主要失效形式。

6、Keywords Multiaxial random loading Fatigue fracture plane Critical plane approach Maximum shear strain plane Weight-averaged method Fatigue damage; ─── 多轴随机载荷;疲劳断裂平面;临界平面法;最大切应变平面;权值平均法;疲劳损伤;

7、multiaxial warp-knitting reinforcement structure ─── 多轴向经编针织增强结构

8、Keywords Multiaxial;Fatigue;High temperature;Softening;Plasticity;Scanning electron microscopes;Creep; ─── 多轴;疲劳;高温;软化;塑性;扫描电镜;蠕变;

9、Experimental study on multiaxial characteristic of air-entraining concrete after freeze-thaw cycling is just in the initial stages. ─── 冻融条件下引气混凝土的多轴力学性能研究，目前尚处于初步阶段。

10、multiaxial fatigue ─── 多轴疲劳

11、MULTIAXIAL FATIGUE LIFE PREDICTION FOR NOTCHED SPECIMENS BASED ON THE CRITICAL PLANE APPROACH ─── 基于临界面法的缺口件多轴疲劳寿命预测

12、This paper introduced manufactures and applications of multiaxial fabric, FRP pipe and tank, FRTP (fiber reinforced thermoplastics) as well as composite Materials Institute of Universities in Germany and Spain. ─── 摘要本文介绍了德国、西班牙多轴向织物、玻璃钢管道与贮罐，热塑性纤维增强塑料的制造和使用，以及大学复合材料研究所的情况。

13、Keywords GH4169 superalloy;high temperature;multiaxial low cyclic fatigue;non-proportional loading;life prediction; ─── GH4169合金;高温;多轴低周疲劳;相位差;寿命预测;

14、Experimental study on multiaxial characteristic of air-entraining concrete after freeze-thaw cycling is just in the initial stages. ─── 冻融条件下引气混凝土的多轴力学性能研究,目前尚处于初步阶段。

15、Based on experimental data and finite element analysis results, a low-cycle fatigue life model is proposed for the powder metallurgy superalloys under multiaxial stress states. ─── 在详细分析试验和有限元计算结果的基础上，提出了复杂应力状态下的低周疲劳寿命模型。

16、Keywords GH4169 superalloy;multiaxial fatigue;fracture;crack initiation;crack propagation; ─── GH4169合金;多轴疲劳;断口;裂纹萌生;裂纹扩展;

17、Keywords multiaxial fatigue;nonproportional loading;LY12CZ aluminum alloy;critical plane;fatigue damage criterion;damage accumulation;life prediction; ─── 多轴疲劳;非比例加载;LY12CZ铝合金;临界面;破坏准则;损伤累积;寿命预测;

18、multiaxial stress state ─── 多轴应力状态

19、Multiaxial fatigue life prediction of fan disk using critical plane method ─── 多轴疲劳理论在航空发动机零部件寿命预测中的应用

20、Multiaxial Fatigue Damage Parameter for Fibre-Reinforced Composites Based on a Critical Plane Approach ─── 基于临界平面法的复合材料多轴疲劳损伤参量研究

21、multiaxial intensity ─── 多轴强度

22、multiaxial fatigue parameters ─── 多轴疲劳参数

23、The test results of nonproportional low cycle fatigue under multiaxial loading of 316L stainless steel are used.The present multiaxial low cycle fatigue life prediction methods are discussed. ─── 摘要利用对316L不锈钢多轴非比例加载低周疲劳的试验结果，对现有的多轴低周疲劳寿命估算方法进行讨论；

24、multiaxial stresses ─── 多轴应力

25、Multiaxial ratchetting ─── 多轴棘轮

26、multiaxial fatigue criterion ─── 多轴疲劳准则

27、multiaxial warp kntting machine ─── 多轴向经编机

28、Keywords Single crystal material Orthotropy Multiaxial stress Asymmetrical cyclic load Low cycle fatigue; ─── 单晶材料;正交各向异性;多轴应力;非对称循环载荷;低周疲劳;

29、A NEW MULTIAXIAL FATIGUE MODEL TAKING INTO ACCOUNT THE INFLUENCE OF TENSILE DWELL TIME ─── 一种考虑拉伸保持效应的多轴疲劳寿命模型

30、By means of selecting penny shaped crack model to simulate the defects in concrete,the damage model for concrete under multiaxial stress state was developed based on statistical fracture theory. ─── 以圆盘裂纹模型模拟混凝土内部的缺陷,基于统计断裂理论推导出了多轴应力下混凝土的损伤统计模型,并根据应变等价假说,建立了包含损伤的混凝土的基本本构关系。

31、Fracture Strength of Ceramics under Multiaxial Stress State ─── 复杂应力作用下结构陶瓷材料的断裂强度

32、Approximate Calculation of Local Stress and Strain under Multiaxial Stress State ─── 多轴应力状态下的局部应力应变近似计算方法及其应用

33、Study of Multiaxial Low - cyclic Fatigue Prediction Methods ─── 多轴低周寿命预测方法研究

34、A method is outlined for making low cycle fatigue life prediction for engineering components subject to multiaxial loading. ─── 介绍了一种预测受多轴交变载荷工程构件的低周疲劳寿命的方法。

35、A multiaxial fatigue damage parameter for fibre-reinforced composite was presented based on critical plane approach and the multiaxial fatigue damage characteristics of composite were investigated. ─── 摘要基于临界平面方法，提出一种用于纤维增强复合材料的多轴疲劳损伤参量，研究了复合材料多轴疲劳损伤特徵。

36、multiaxial joints ─── [医] 多轴关节, 杵臼关节

37、The iterative formulas of elastoplastic stochastic finite element method (SFEM) under cyclic loading are deduced and the random responses of local multiaxial stress and strain are calculated. ─── 推导了交变载荷下弹塑性随机有限元的迭代格式,计算了局部多轴应力应变的随机响应。

38、multiaxial non proportion simutaneity ─── 多轴非比例加栽

39、multiaxial fabric ─── 多轴向织物

40、A method is outlined for making low cycle fatigue life prediction for engineering components subject to multiaxial loading. ─── 介绍了一种预测受多轴交变载荷工程构件的低周疲劳寿命的方法。

41、multiaxial assessment ─── 多轴评估法

42、Keywords Atlantoaxial fixation Multiaxial screw system Atlantoaxial instability; ─── 寰枢椎固定;万向螺钉;寰枢椎不稳定;

43、On Cyclic Deformation of 304 Stainless Steel under Strain-Controlled Nonproportionally Multiaxial Loading at High Temperatures ─── 304不锈钢高温非比例多轴应变循环变形行为研究

44、Elastoplastic Finite Element Analysis of Smoothing Specimen Under Multiaxial Cycle Loading ─── 光滑薄壁管件的多轴循环弹塑性有限元分析

45、The theoretical and practical significance of modeling error and controlling error in multiaxial servo systems was pointed out. ─── 指出了多轴加工中轮廓误差建模和误差控制方法的理论意义和应用价值。

46、The proposed model reveals the anisotropic multiaxial damage characteristics of concrete effectively. ─── 本模型可有效地表达出混凝土的各向异性和多轴损伤特点。

47、For the multiaxial proportional loading, the dispersion degree of fatigue cracks was low. ─── 在多轴比例加载条件下，裂纹分布的分散性较小。

48、eigenvalue equation of multiaxial strength parameter ─── 多轴特征强度参数方程

49、The fracture surfaces of multiaxial fatigue specimens under proportional and non-proportional multiaxial loadings were observed and analyzed by using a scan electron microscope. ─── 摘要利用扫描电镜对多轴比例和非比例载下的疲劳试样的断口面和外表面进行扫描观测分析。

50、Effects of Mean Strain on Multiaxial Cyclic Behaviour and Fatigue Life ─── 平均应变对多轴循环特性及疲劳寿命的影响

51、Keywords multiaxial fatigue;cyclic hardening and softening;proportional loading;non-proportional loading;high temperature; ─── 多轴疲劳;循环硬化与软化;比例加载;非比例加载;高温;

52、Multiaxial spot film ─── 多轴位点片

53、multiaxial deformation ─── 多轴变形

54、Biaxial analysis was used to get the multiaxial information, and fatigue calculation of multiaxial crack initiation was conducted. ─── 寿命预测采用多轴裂纹萌生疲劳分析，其中部件的多轴特性通过二轴分析获得。

55、Keywords air-entraining concrete;freeze-thaw cycling;multiaxial strength;failure criterion; ─── 引气混凝土;冻融循环;多轴强度;破坏准则;

56、A new proportional factor was introduce into the model in order to consider the effect of loading path shape on the multiaxial ratcheting. ─── 定义了一个新的非比例因子,讨论了非比例加载路径对棘轮行为的影响。

57、multiaxial strength ─── 多轴强度预测

58、The advances in the research of fatigue-creep interaction were introduced, including the mechanisms of micro-crack initiation and growth and the development of multiaxial fatigue-creep test. ─── 摘要介绍国内外疲劳-蠕变交互作用研究的一些进展，其中包括微观裂纹萌生及扩展机理的研究、高温多轴疲劳-蠕变实验的发展。

59、Conclusion Multiaxial spot film is an effective tool to diagnose the occult rib fracture. ─── 结论多轴位点片是诊断隐匿性肋骨骨折的有效工具。

60、The developments of multiaxial fabrics in the world are introduced. ─── 介绍了多轴向技术在世界各国发展状况。

61、BEHAVIOR OF MULTIAXIAL FATIGUE CRACK PROPAGATION ─── 多轴疲劳裂纹扩展行为研究

62、Keywords stress field intensity approach;fatigue notch factor;fatigue loading type factor;fatigue size factor;multiaxial fatigue;fatigue limits;S-N curves; ─── 应力场强法;疲劳缺口系数;疲劳尺寸系数;疲劳加载方式;多轴疲劳;疲劳极限;S-N曲线;

63、STUDY OF COMPRESSION AFTER IMPACT ON MULTIAXIAL WRAP-KNIT/STITCHING COMPOSITES ─── 多轴向经编/缝合织物增强复合材料冲击后压缩强度研究

64、multiaxial loading ─── 多轴载荷

65、multiaxial joint ─── 多轴关节, 杵臼关节

66、Multiaxial fatigue behavior of superalloy GH4169 was investigated by using the thin tubular multiaxial fatigue specimens under proportional and non-proportional loadings at high temperature. ─── 利用薄壁管拉扭疲劳试样,在高温控制应变循环加载下研究高温合金GH4169的多轴疲劳行为。

67、Keywords Multiaxial ratchetting;Ratchetting strain;Fatigue life prediction; ─── 多轴棘轮;棘轮应变;疲劳寿命预测;

68、DETERMINATION OF THE FRACTURE PLANE UNDER MULTIAXIAL RANDOM LOADING ─── 多轴随机载荷下断裂平面的确定方法

69、multiaxial jet-grouting impervious wall ─── 多轴旋喷防渗墙

70、multiaxial electromechanical loading ─── 多轴力电耦合

71、We provide multiaxial servo controlled system robot. ─── 提供多轴伺服控制的机械手和机器人。

72、Estimation of Brittle Materials'Strength Under Multiaxial Stress State ─── 多轴应力状态下脆性材料强度的估算

73、STRENGTH CRITERION FOR PLAIN CONCRETE UNDER MULTIAXIAL STRESS STATES BASED ON DAMAGE POISSON'S RATIO ─── 基于损伤泊松比的混凝土多轴强度准则

74、A multiaxial fatigue life prediction model was built by means of the proposed multiaxial fatigue damage parameter. ─── 根据该参量，本文建立了多轴疲劳寿命预测模型。

75、multiaxial system ─── 多轴诊断系统

76、For multiaxial life prediction, the critical plane approach is better than that of others, however, the accuracy of life prediction is deeply influenced by the results of stress-strain analysis. ─── 在多轴疲劳寿命预测的问题上临界平面法是一种比较好的方法，而影响临界平面法预测结果精确度的主要因素是所进行的应力应变分析。

77、multiaxial nomenclature ─── 多轴心命名法

78、Biaxial analysis was used to get the multiaxial information, and fatigue calculation of multiaxial crack initiation was conducted. ─── 寿命预测采用多轴裂纹萌生疲劳分析，其中部件的多轴特性通过二轴分析获得。

79、The time-dependent ratcheting behavior of SS304 stainless steel was experimental studied at room temperature under non-proportionally multiaxial cyclic loading. ─── 在室温下,对SS304不锈钢非比例多轴循环加载下的时相关棘轮行为进行了实验研究。

80、multiaxial drawing ─── 多轴拉伸

81、multiaxial stress field ─── 多轴应力场

82、Finally, the future directions in the research of multiaxial low cycle fatigue are suggested. ─── 并建议今后多轴低周疲劳课题的研究方向。

83、Karl Mayer: optimization of the Malimo Multiaxial machine ─── 卡尔·迈耶公司:马利莫多轴向编织机的优化

84、multiaxial tensile loads ─── 多轴向拉伸载荷

85、Study on a Robotic System for Multiaxial Bore Assembling ─── 一种用于多轴孔装配的机器人系统研究

86、multiaxial strength model ─── 多轴强度模型

87、A multiaxial Low Cycle Fatigue Damage Parameter for Single Crystal Nickel-Based Superalloys ─── 一种镍基单晶合金多轴低周疲劳损伤参量

88、multiaxial compression strength ─── 多轴压强度

89、multiaxial low - cyclic fatigue ─── 多轴低周疲劳