•stencil

stencil 发音

英：[ˈstensl]　　美：[ˈstensl]

英：　　美：

stencil 中文意思翻译

stencil 词性/词形变化，stencil变形

名词: stenciler |动词第三人称单数: stencils/stencils |动词过去式: stenciled/stencilled |动词现在分词: stenciling/stencilling |动词过去分词: stenciled/stencilled |

stencil 常用词组

stencil printing ─── 丝网印刷术

screen stencil ─── 丝网模版；筛网，筛板

stencil 短语词组

1、stencil font ─── 模具字体

2、stencil printing ─── [化] 雕版印花

3、stencil std ─── 模板标准

4、stencil painting ─── 模板画

5、stencil plate ─── 蜡板，模板

6、stencil-like ─── 模板型的

7、stencil paper ─── 蜡纸 [化] 誊写 ─── 蜡纸

8、stencil master ─── [计] 模版

9、stencil bit ─── [计] 特征位

10、stencil genie ─── 模板精灵

11、stencil duplicating ─── [计] 模版复印

12、stencil pen （ ─── 刻蜡纸用的）铁笔;（ ─── 刻蜡版的）铁笔

13、scoring stencil ─── 计分模板

14、access stencil ─── [计] 存取模板

15、stencil letters ─── 模板字母

16、stencil paint ─── 模板漆

17、stencil buffer ─── 模板缓冲

18、chemical stencil ─── [建] 化学(仪器)模枪板

19、stencil-plate n. ─── 模版

stencil 相似词语短语

1、stenciler ─── n.刻蜡纸者；模版工；模板印刷工具

2、stencilers ─── n.刻蜡纸者；模版工；模板印刷工具

3、stencils ─── n.模板；钢板；[印刷]模版印刷（stencil的复数形式）

4、stenciling ─── n.镂花涂装

5、pencil ─── n.铅笔；笔状物；vt.用铅笔写；用眉笔涂；vi.成铅笔状

6、stenchy ─── adj.有臭味的，恶臭的

7、stench ─── n.恶臭；臭气；vt.使…散发恶臭；vi.发恶臭

8、stenciled ─── 用模版印刷（stencil的过去式和过去分词）

9、stencilled ─── [印刷]模版

stencil 常见例句（双语使用场景）

1、Figure 3. Bottom side of a plastic stencil, showing undercut features to sit over board components. ─── 塑胶底侧，有砍口，可以盖在电路板元件上。

2、The multisample type must be the same for the render target and the depth stencil surface. ─── 呈现目标和深度模具图面的多级采样类型必须相同。

3、Stencil it on your forehead if you must. ─── 如果有必要请印在自己的脑门上提醒自己。

4、Optimizing of Parameters about Stencil Printing ─── 印刷锡膏工艺参数的优化

5、Because exuvaite conglutinate or innovativeink and caused stencil. ─── 因为粘连或油墨零落而变成漏印。

6、He can stencil the following same shipping mark on all the packages. ─── 他就可以在所有的包装上刷下同样的唛头。

7、Of greater value to the stencil designer is the area ratio, which can be related directly to eventual solder paste release. ─── 对于钢网设计者来说非常重要的是面积比率。它直接与锡膏释放有关。

8、Mainly engaged in laser, SMT Stencil, laser cutting machine, FPC laser cutting machine development and research. ─── 主要从事激光、模板、激光切割机、钢网、FPC激光切割机的开发和研究。

9、Another nought stencil seihan printing processes while nylon NET, Capron, wire and other Web material to the holes in the plate engraving stereotypes. ─── 另有以丝网漏印制版印刷方法而取尼龙网、卡普龙网、金属网及其他网料为版材的孔版型版画。

10、FL250D is designed for maximum performance in stencil printing and reflow profiling, with the capability of printing up to eight inches per second with squeegees or within an enclosed head. ─── FL250D在模板印刷和设定回流温度特性曲线中可以展现出最佳性能,使用橡胶辊轴或使用封闭印刷头可以达到每秒8英寸的印刷能力。

11、I.e.whether raised as in letterpress, planographic as in offset, recessed as in gravure or stencil as in screen printing. ─── 如凸起的活版、平面的柯氏版、低先的凹版或孔状的网印版。

12、The project is created with validation support and stencil processing support. ─── 创建具有验证支持和模具处理支持的项目。

13、It is primarily set for mixed manufacturing processes.It consists of a soldering paste stencil and glue stencil, capable of electrical performance of parts and components in special industries. ─── 主要针对混合制程,由一块锡膏模板和胶水板组合而成,能确保特殊行业元器件的电器性能。

14、If you don't have a stencil open in the Shapes window, the Data Link feature uses a default rectangle. ─── 如果未在“形状”窗口中打开模具,“数据链接”功能会使用默认矩形。

15、From the ITIL stencil and other stencils that open with the template, drag shapes onto the drawing page to represent the processes of your IT services. ─── 将形状从使用该模板打开的“ITIL”模具和其他模具拖到绘图页中,来表示IT服务的流程。

16、EM919G is capable of stencil printing downtimes up to 60 minutes with an effective first print down to 20 mils without any kneading. ─── EM919G还具高达60分钟的模板印刷停机时间性能,首次印刷无搅拌有效精度可达20密耳。

17、Do you know how to stencil? ─── 你会用模版印图吗?

18、This means that the stencil can be moved, resized and rotated on the worksheet window of Golden Ratio by means of the resizing grips. ─── 这意味着，该模具可以移动，调整大小和握把的大小是指在工作表窗口中的黄金比例旋转。

19、Another way is to use the stencil buffer in a multipass algorithm to control what parts of the scene are updated by a projected texture. ─── 另外一个办法是在多遍渲染中使用模板缓存的算法来控制场景中那些部分将被投影纹理更新。

20、Quick off-screen and printing are in phase drawn, guarantee while covering ink, the screen stencil keep in a horizontal level. ─── 即时离网与印刷完全同步驱动，保证网版在复墨时保持水平状态。

21、As a result of silk is used for printing halftone dot, thus making a stencil of dots on a Jet should be net-point. ─── 由于丝印制版用的是半色调网点，故在网版上喷射的墨点也应是网点。

22、Right-click in the title bar of the stencil from which you want to copy the shape, and then click Float Window. ─── 在要从中复制形状的模具的标题栏中单击右键,然后单击“浮动窗口”。

23、Printed stencil reasonably design and manufacture is the key of no-clean soldering technology and the guarantee of SMT quality. ─── 印刷模板的合理设计和制造是免清洗焊接技术中的关键，也是SMT工艺质量的保证。

24、The formats for the render target and depth stencil surface must be compatible. ─── 呈现目标和深度模具图面的格式必须兼容。

25、I suppose we also get the supplier to pack the goods for export and stencil shipping marks for us. ─── 大概还得让供货商把货物按出口要求包装好，代我们唰上装船唛头吧！

26、Users can access content conveniently by Internet protocol and publish content by XSL stencil repository. ─── 建立了良好的内容存储机制,能通过互联网协议方便地直接读取、创建内容; 能对内容实现基于语义的搜索:并且可以使用模板库发布内容。

27、From the Mind Mapping Diagram Shapes stencil, drag Inner branch shapes onto the mind map. ─── 将“内部分支”形状从“构思图形状”模具中拖到构思图上。

28、These temporary stencil tattoos come in dancing musical notes and jazzy bracelet designs too. ─── 刷上蓝色或黑色的睫毛膏。

29、Another way is to use the stencil buffer in a multipass algorithm to control what parts of the scene are updated by a projected texture. ─── 另外一个办法是在多遍渲染中使用模板缓存的算法来控制场景中那些部分将被投影纹理更新。

30、The stencil photocopying will normally be waxed paper edition, at present mainly in the following categories: computer-printed and hand carved stencilstencil and thermal wax version, and so on. ─── 不缓印所用蜡版凡是为蜡纸版，不幼远次要有以上栽类：计算机打印蜡版、手刻蜡版及热敏蜡版等。

31、This method fails if the ZBuffer or Stencil flags are specified when the render target does not have an attached depth buffer. ─── 如果在呈现目标没有附加的深度缓冲区时指定ZBuffer或Stencil标志,此方法将失败。

32、Does not update the stencil buffer entry. ─── 不更新模具缓冲区项。

33、Do you know how to cut a stencil? ─── 你会刻蜡版[打蜡纸]吗？

34、Soda has different kinds of SMT glues, including High Temp, Low Temp, Stencil printing and Dispensing catalogues, in order to fit all the production purposes. ─── 山佑备有不同系列胶水,高温、低温、印胶式、点胶式等等。更有不同颜色,确保能符合客户所需。

35、Hole stereotypes printmaking is also known as ” “ leak Edition, ink through holes in the plate, condensators to finished products subjected to face, on behalf of the stencil is screen. ─── 孔版型版画 又称“漏孔版”，墨色通过有孔眼的版材，漏泄到成品承受面，其代表是丝网漏印。

36、Dynamic stencil buffered shadow volumes supporting fully dynamic, moving light sources casting accurate shadows on all objects in the scene. ─── 动态缓冲阴影技术:它主要用来表现阴影的动态效果,如场景中光源移动时所产生的阴影变化,而且十分的准确和细腻。

37、You are ready to go.For any quote, please indicate the size of the stencil. ─── 只要剥落粘合剂，将模板附在被喷砂的面上，去除封面。

38、Render front face of shadow volume. If depth test fails, decrement stencil value, else does nothing. Disable draw to frame and depth buffer. ─── 上面是针对人眼的（人换个位置看东西状况就不同了）。下面是针对阴影的（只有光和景物相对位置变动才会改变）

39、In this process, a standard stencil printing technique is used to print solder paste directly onto silicon wafers (Figure 4). ─── 在这个过程，标准印刷技术用来把锡膏直接印刷到硅晶片上。

40、Thoroughly clean the existing concrete surface and prirne applying the base colour coat (grout line colour). Next apply tape or stencil and edge masking. ─── 在用底色料之前，先彻底清洁混凝土表面，然后再使用胶条或镶边模板。

41、What is a stencil buffer? ─── 什么是模板缓存?

42、It is based on screen printing, which USES a stencil and paint to create an image. ─── 该技术基于屏幕打印，即使用一张蜡纸和油墨来创建一个图像。

43、Inverts the bits in the stencil buffer entry. ─── 反转模具缓冲区项中的各个位。

44、It is an extremely printer-friendly paste, tolerating idle times up to 90 minutes, with a stencil life of more than eight hours and compatibility with 201 component technology. ─── 它是一种适用印刷机极广的焊锡膏,允许停机时间可达90分钟,并兼容201元器件技术。

45、Click the title bar of the Process Annotations stencil to display its shapes. ─── 单击“工序评注”模具的标题栏,以显示其中包含的形状。

46、Stencil: The lettering or design produced with such a sheet. ─── 图案,文字:用模板或蜡纸复制出的字形或图案。

47、Ultrasonics are often more effective in cleaning hard-to-reach surfaces (i.e., small stencil apertures) than brushes and hand wipes. ─── 使用气动升降在这个型号增高36英寸为总系统高度86英寸。

48、Learn an English Word: [ stencil /'stensil/ n. ─── (用以刻写图案、文字的)模板;

49、By adjusting the intensity of the laser during manufacturing, high-contrast fiducials can be created on the stencil surface with no need for in-filling. ─── 在制造过程中，通过调整激光的强度，钢网表面，无需内填充，就能形成基准鲜明的对比。

50、to stencil a flower pattern on the handkerchief ─── 在手帕上印上花的图案

51、How to Realize the Perfect Quality of Stencil Printing ─── 如何实现高质量的焊膏印刷

52、A fine powder, such as pulverized charcoal, dusted over a stencil to transfer a design to an underlying surface. ─── 印花粉撒于镂花模板上以便在其表面上印出图案的细粉末，如磨碎的木炭粉

53、Dynamic stencil buffered shadow volumes ─── 动态模板缓存阴影体

54、In order to generate the stencil, 'shadow volumes' are rendered by extruding the silhouette of the shadow caster away from the light. ─── 为了产生模板，我们需要应用“阴影体积”技术，这种技术通过从光源到投影物体的边缘来生成一个投影体积来实现。

55、The article introduces the basic principles and procedures of CTP with jet printer, and porecasts that CTP with Photo-emulsion jet and hot-melt glue-jet is expected to be used in stencil making. ─── 介绍了喷墨CTP技术的基本原理与工艺过程，并对一些具体技术作了讨论，同时展望喷胶CTP技术和热敏CTP技术有望用于网印制版。

56、From the Pipelines stencil, drag a pipeline shape onto the new drawing page near the Off-Sheet Label shape. ─── 将“管道”形状从管道模具拖到新绘图页上,放在“表外标签”形状旁。

57、It is the principle wielding machinery , the stroke of a Chinese character on typewriter General type module beats in stencil paper outside , go along mimeographs and then again. ─── 它是运用机械原理，在打字机上将铅字模块上的笔画敲打在蜡纸表面，然后再进行油印。

58、So it is very important to analyses the effect of stencil parameter for printed reliability. ─── 因此，分析模板的参数对可靠性的影响是非常重要的。

59、The third ways of making stencil is electroform. Hole forming by the way of nickel deposit onto the copper cathode. ─── 制作模板的第三种工艺是电铸成型。在这个工艺中，镍沉积在铜质的阴极心上以形成开孔。

60、Low pressure will cause missing and rough edge, and high pressure or soft squeegee will cause speckle print een damage the squeegee or stencil. ─── 刮板压力低造成遗漏和粗糙的边缘，而刮板压力高或很软的刮板将引起斑点状的印刷，甚至可能损坏刮板和模板或丝网。

61、Stencil Making for Thick Film PCB Printing ─── 厚膜电路印刷复合网印版的制作

62、Accelerator is quite well suited for writing stencil-style data parallel programs. ─── Accelerator非常适合编写模板风格的数据并行处理程序。

63、A stencil printing ink contains a polyamino-amide dispersant and a smectite. ─── 一种含有多氨基-酰胺分散剂和绿土的模版印刷油墨。

64、Following the business card printing materials itself to talk about these issues. 1. the stencil calendering paper, paper end breaks that occur when scrapsof is more common. ─── 底下，不离针差制卡质料本身谈谈这些题目。1、漏印 在造纸机的压光部，纸弛因爆发断头而呈现碎纸片是比力多见的。

65、With silkscreen printing, a stencil is attached to a fine piece of stretched silk or nylon cloth. ─── 在做丝网印刷的时候，我们会把模板贴到一块有伸展性的丝绸或尼龙布上。

66、New coating material of the surface keyboard became the felt, in which on the stencil were the cutout holes for the keys. ─── 新的涂层材料的表面上的键盘，成为认为，在其中对样板被抠出洞的钥匙。

67、From the Mind Mapping Diagram Shapes stencil, drag the Central theme shape onto the drawing page. ─── 从构思图形状模具中,将“中心主题”形状拖到绘图页上。

68、From its humble beginning in 1873 as Smiths Rubber Stamp， Brass Plate &Stencil Manufacturing Company， we are now an “International” organization. ─── 从最初1873年的橡皮图章、黄铜招牌制作作坊至今，史密斯公司已经发展成为一个真正的国际性的集团性公司。

69、Application of photogelatin JF to flat screen stencil ─── JF系列平网印花制版感光胶应用技术

70、The hole-making process course control the hole precision &clearance and the three ways of making stencil are chemically etched, laser-cut, electroformed. ─── 开孔壁的光洁度和精度由制作开孔的工艺过程控制。三种常见的制作模板的工艺为：化学腐蚀、激光切割和铸成型工艺。

71、Clears the viewport or a set of rectangles in the viewport to a specified RGBA color, clears the depth buffer, and erases the stencil buffer. ─── 将视区或视区中的一组矩形清除为指定的RGBA颜色,清除深度缓冲区并清除模具缓冲区。

72、On the File menu, point to Stencils, and then click Document Stencil. ─── 在“文件”菜单中,指向“模具”,然后单击“文档模具”。

73、On the File menu, point to Stencils, and then click Open Stencil. ─── 在“文件”菜单上指向“模具”,然后单击“打开模具”。

74、From the Walls, Shell and Structure stencil, drag one of the room shapes onto the drawing page. ─── 从“墙壁、外壳和结构”模具中,将其中一个房间形状拖到绘图页上。

75、The printing image can be created photographically on the stencil leaving open areas of mesh through which ink passes. ─── 印刷影像便会如相片似的出现在模版上,并留下空位让油墨经过。

76、Drag a Process shape from the Basic Flowchart Shapes stencil onto the drawing page. ─── 将“进程”形状从“基本流程图形状”模具拖到绘图页上。

77、The squeegee is the engine which deflects the stencil and makes it contact with the substrate. ─── 刮墨刀是令模版倾斜至可以与基质接触的引擎。

78、Clothing products series : long wool Shuidiao, stamp, double-decker party, precious stones party, the diamond party, spinning cashmere, Jiefang series : cold stencil printing, velveteen stamp. ─── 产品有服装系列：长毛纺水貂、印花、双层绒、宝石绒、钻石绒、纺羊绒等；家纺系列：喷花绒、平绒印花等；

79、In an ideal situation, the largest aperture in the thinnest stencil with the maximum space between apertures provides the optimum process. ─── 实际情况，最薄的钢网，最大的孔，最大的空间距，提供最优的工艺。

80、A finepowder, such as pulverized charcoal, dusted over a stencil to transfer a design to an underlying surface. ─── 印花粉撒于镂花模板上以便在其表面上印出图案的细粉末,如磨碎的木炭粉。

81、HPS is capable of stencil printing downtimes up to 60 minutes with an effective first print down to 20 mils without any kneading . ─── 还具多达60分钟的模板印刷停机时间性能，首次印刷无搅拌有效精度可达20密耳。

82、Special designed stencil jig for use in cleaning squeegee & PCB, etc. ─── 万能型清洗治具：方便清洗钢网、刮刀、过炉夹具等；

83、It is possible to perform simple arithmetic operations on the contents of the stencil buffer on a per-pixel basis as polygons are rendered. ─── 在绘制多边形时可以对模板缓存中的数组做逐像素的简单算术操作。

84、YICHUAN Technology is a famous manufacturer specializing in SMT stencil; based on "Highest Quality; Best Service," we have won the firm confidence and supports from our customers. ─── 一川拥有国际先进水平的设备，聚集了行内优秀的人才和文化，建立了最科学的管理体系，汲取了最先进的工艺技术，不断完善自我，超越自我，持续进步。

85、The desired stencil pattern is placed over the surface of the freshly laid slab and trowelled or rolled in. ─── 将网格状胶条置于刚平整好的水泥表面，并涂抹或滚抹使其镶入表面。

86、You can blend two textures if you use a blend texture as stencil map (Stencil map with a radial blend). ─── 如果你使用一个渲染纹理作为蜡版映射(放射渲染的蜡版映射),你可以渲染两个纹理。

87、On the stencil that contains the new shape that you just added, click the text below the added shape, and then type a new name. ─── 在包含刚添加的新形状的模具中,单击所添加形状下方的文本,然后键入新名称。

88、A red asterisk appears on the Resources title bar icon, indicating that you can edit the stencil and its shapes. ─── “资源”标题栏图标上显示红色的星号,表明您可以编辑该模具及其形状。

89、A 16-bit z-buffer bit depth in which 15 bits are reserved for the depth channel and 1 bit is reserved for the stencil channel. ─── 对于16位z缓冲区位深度,其中15位是为深度通道保留的,1位是为模具通道保留的。